|
Post by cambo on Jan 16, 2018 19:05:25 GMT 10
2018 DTM ChampionshipThe Monday Factor DTM Championship will consist of 16 Rounds from all around the globe. This year success ballast also will play a part in this championship. Longer championships (16 Rounds) & having lowest 2 rounds dropped allowing for the odd mishap or just not been able to make a round or two so it wont hinder you championship aspirations.
Mod used: URD T5 v2.0 (United Racing Designs Payware Link ) DTM Skin Pack - Skin Pack Link scroll down look for 3 files Install the T5 mod first then apply the skin pack as an update Championship Rules
All participants must have read the SRA Racing Rules You must be connected to teamspeak (To hear race messages you don't necessarily require a mic although can be helpful to relay messages and banter) Qualifying is 1 hot lap only. Keep clear of drivers on their hot lap when on warm up lap. No Talking during qualifying. Races will have a formation lap then standing starts & all drivers must take care & give racing room. All 1st lap incidents will be investigated by the steward. Success Ballast & Round placing will be determined by the driver with most points from both races & if more than 1 driver ends with the same points the driver with the highest position in race 2 will be the tiebreaker. DRS is available in the zones during practice & qualifying to all drivers. During the race you must be within 1 sec at detection point to enable DRS in the zone. Fuel mixture & Anti Roll Bar adjustment can be made incar. Both Soft & Option Tyre compounds must be used in Race 2 failure to do so will result in DQ Drivers have 24hrs if they want to have an incident reviewed by the stewards. Just send a PM or post in the Monday Judiciary thread
Server SettingsFuel X2
Tyre X2
Timescale X2
Real Road X2
Damage 50%
Flags All ex Dq
Real Weather Enabled but Dry
Server Name: simracingaustralia.net# 1Race Night Format
Session | Time (AEST+11UTC) | Length | notes | Practice | 7:00PM | 90 minutes |
| Qualifying | 8:30PM | 5 minutes | 1 hot lap | Warmup | 8:35PM | 10 minutes |
| Race 1 | 8:45PM | 20 minutes |
| Warmup 2 | 9:05PM | 10 minutes |
| Race 2 | 9:15PM | 40 minutes | must use both tyre compounds |
Position | Points Race 1 | Points Race 2 | 1st | 10 | 25 | 2nd | 9 | 22 | 3rd | 8 | 20 | 4th | 7 | 18 | 5th | 6 | 16 | 6th | 5 | 14 | 7th | 4 | 12 | 8th | 3 | 10 | 9th | 2 | 8 | 10th | 1 | 6 | 11th |
| 5 | 12th |
| 4 | 13th |
| 3 | 14th |
| 2 | 15th |
| 1 |
Success Ballast & Round placing will be determined by the driver with most points from both races & if more than 1 driver ends with the same points the driver with the highest position in race 2 will be the tiebreaker.
Round Position | Weight | 1st | +25kg | 2nd | +15kg | 3rd | +10kg | 4th | +5kg | 5th | -5kg | 6th | -10kg | 7th | -15kg | 8th + | -25kg |
Max limit 100kg
Round 1 19th Feb 2018 Jerez GP
2 26th Feb 2018 Mexico '88 DRS
3 5th Mar 2018 Zolder
4 12th Mar 2018 Suzuka
5 19th Mar 2018 Red Bull Ring
6 26th Mar 2018 Magny Cours
7 2nd Apr 2018 Monza
8 9th Apr 2018 Fuji
9 16th Apr 2018 Most Autodrom 10 23rd Apr 2018 Istanbul 11 30th Apr 2018 Spa Francorchamps 12 7th May 2018 Road America 13 14th May 2018 Valencia 14 21st May 2018 Dijon Prenois
15 28th May 2018 Donington 16 4th June 2018 Croft
|
|
|
Post by gwyar on Jan 17, 2018 13:08:08 GMT 10
Bit confused.Is it the T5 2012/2013 mod we download, cos the heading says 2018 DTM, so not sure if maybe I can't see the correct download?
|
|
|
Post by cambo on Jan 17, 2018 14:30:04 GMT 10
Bit confused.Is it the T5 2012/2013 mod we download, cos the heading says 2018 DTM, so not sure if maybe I can't see the correct download? check your messages
|
|
|
Post by gwyar on Jan 17, 2018 17:40:59 GMT 10
Thanks Cambo, great fun to drive, should be a great season. btw, do these cars all have the same physics,meaning do I pick a car on looks or driving feel?
|
|
|
Post by cambo on Jan 17, 2018 20:02:50 GMT 10
Yes all cars are equal, 2012 model has no DRS but that wont be in the available cars
|
|
Matt
New Member
Posts: 48
|
Post by Matt on Jan 29, 2018 21:51:22 GMT 10
Can anyone explain the naming format needed to compile a .mas file with the 5 files for a custom skin?
|
|
|
Post by cambo on Jan 30, 2018 15:53:14 GMT 10
|
|
Matt
New Member
Posts: 48
|
Post by Matt on Jan 30, 2018 15:54:51 GMT 10
Can anyone explain the naming format needed to compile a .mas file with the 5 files for a custom skin? To elaborate, I have downloaded the T5 template from URD, I have changed the XX in the default filenames to 13 (eg: BayroT5_XX.dds to BayroT5_13.dds) for all of the 5 supplied files and added them to a Mas file name alt_13.mas When I add this to a car the skin doesn't show my skin but the default one instead. Have I missed something or done something wrong? Normally I don't have any problems.
|
|
Matt
New Member
Posts: 48
|
Post by Matt on Jan 30, 2018 15:58:56 GMT 10
Can anyone explain the naming format needed to compile a .mas file with the 5 files for a custom skin? To elaborate, I have downloaded the T5 template from URD, I have changed the XX in the default filenames to 13 (eg: BayroT5_XX.dds to BayroT5_13.dds) for all of the 5 supplied files and added them to a Mas file name alt_13.mas When I add this to a car the skin doesn't show my skin but the default one instead. Have I missed something or done something wrong? Normally I don't have any problems. OK, I think I see what the problem is. I should be replacing the "BayroT5" with "alt". Fingers crossed edit: yep, that was it.
|
|
|
Post by cambo on Jan 30, 2018 16:46:21 GMT 10
Ok thanks, about to go through this myself
|
|
|
Post by cambo on Feb 6, 2018 7:30:03 GMT 10
Can anyone explain the naming format needed to compile a .mas file with the 5 files for a custom skin? Did you manage to get the windscreen banner to show. I packed all files into a .mas had alt74 at the beginning of all files. The side window & rear worked but the front one always show the default alt74windshield.dds is the file name in the .mas
|
|
Matt
New Member
Posts: 48
|
Post by Matt on Feb 6, 2018 8:48:35 GMT 10
Can anyone explain the naming format needed to compile a .mas file with the 5 files for a custom skin? Did you manage to get the windscreen banner to show. I packed all files into a .mas had alt74 at the beginning of all files. The side window & rear worked but the front one always show the default alt74windshield.dds is the file name in the .mas I couldn't get the front windscreen to work or the file with the white square and rf2 logo. I found that using one of the skin pack cars gave a better front windscreen with the Bosch logo rather than the zmodeler3 one at least.
|
|
|
Post by Sputnik_inc on Feb 15, 2018 21:55:08 GMT 10
I'm having a problem with buying this.. when i click on buy now, i very briefly see the credit card details form and then it comes up with "Your shopping cart is empty"
Any Ideas?
|
|
|
Post by daniel on Feb 16, 2018 10:36:19 GMT 10
I'm having a problem with buying this.. when i click on buy now, i very briefly see the credit card details form and then it comes up with "Your shopping cart is empty" Any Ideas? Tried a different browser? It seems to work for me on Chrome.
|
|
|
Post by cambo on Feb 17, 2018 15:16:19 GMT 10
Did you manage to get the windscreen banner to show. I packed all files into a .mas had alt74 at the beginning of all files. The side window & rear worked but the front one always show the default alt74windshield.dds is the file name in the .mas I couldn't get the front windscreen to work or the file with the white square and rf2 logo. I found that using one of the skin pack cars gave a better front windscreen with the Bosch logo rather than the zmodeler3 one at least. Got it working by adding a file with the name alt_XXwindshieldout.dds as well as the alt_XXwindshield
|
|