|
Post by Josh on Sept 11, 2016 23:10:40 GMT 10
This should work for both Steam and non-Steam versions but you will need to know the server's IP address and HTTP port. 1. Open the rFactor 2 launcher and go to the settings tab 2. Click Single Player (not multiplayer) above the textbox 3. Paste the following into the textbox: +multiplayer +connect <SERVER_IP>:<HTTP_PORT> Replace <SERVER_IP> with the IP address of the server and <HTTP_PORT> with the HTTP port of the server and ensure there is a colon between them For the TMF server (simracingaustralia#1) this will be: +multiplayer +connect rf2.simracingaustralia.net:65005 For the RFL server (simracingaustralia#2) this will be: +multiplayer +connect rf2.simracingaustralia.net:64297 For the EVT server (simracingaustralia#3) this will be: +multiplayer +connect rf2.simracingaustralia.net:27013
See simracingaustralia.freeforums.net/thread/8/rfactor-2-severs-live-timing for the most up to date server information 4. Click the Save button 5. Click the Single Player button (not multiplayer) Note that to play single player again, you will need to remove this from the textbox and hit the save button.
|
|
|
Post by mike on Sept 12, 2016 8:36:30 GMT 10
Thank you Josh.
|
|
|
Post by cambo on Sept 12, 2016 19:28:10 GMT 10
bump
|
|
|
Post by bwana on Sept 14, 2016 9:38:49 GMT 10
|
|
|
Post by cambo on Oct 3, 2016 18:07:33 GMT 10
bump
|
|