|
|
Post by cambo on Jun 1, 2018 9:07:48 GMT 10
  SimRacingAustralia.net DTM ChampionshipRound 16
4 June 2018
Croft
Series Details
Croft - Steamworkshop Link
also via server
Race Night Format
| Session | Time (AEDT+11UTC) | Length | notes | | Practice | 7:00PM | 90 minutes | Track rubber set to light | | Qualifying | 8:30PM | 5 minutes | 1 Hot Lap | | Warmup | 8:35PM | 10 minutes | Includes Driver Brief | | Race 1 | 8:45PM | 20 minutes |
| | Race 2 | 9:15PM | 40 minutes | Both tire compounds must be used |
Please be connected to Teamspeak prior to qualifying |
|
|
|
Post by Sputnik_inc on Jun 2, 2018 12:28:48 GMT 10
Aaah.. last race with these DTM's.. really enjoyed the racing with these
|
|
|
|
Post by bwana on Jun 2, 2018 13:32:30 GMT 10
doing the airport run Monday .  |
|
|
|
Post by christopheraser on Jun 2, 2018 14:55:07 GMT 10
More than likely wont be able to make this or the next few races. Something inside my wheel has failed and I have no idea if I should replace repair or what and if I replace it, what I should replace it with? T300's are more expensive and harder to get now than they were when I got this three years ago. I have attached a video below, any of you guys had similar issues with T300's or 500's? t_video6091482430072422447.mp4 (804.32 KB) |
|
|
|
Post by bwana on Jun 2, 2018 15:02:47 GMT 10
CSV 2.5 👍
|
|
|
|
Post by christopheraser on Jun 2, 2018 15:32:01 GMT 10
|
|
|
|
Post by gwyar on Jun 4, 2018 17:08:34 GMT 10
Getting "package not available" when I try to join the server, but have Croft from Steam workshop?
|
|
|
|
Post by Sputnik_inc on Jun 4, 2018 17:30:07 GMT 10
Getting "package not available" when I try to join the server, but have Croft from Steam workshop? Try removing it and then let the server install the missing part (track) I did that yesterday.. no problem there.. |
|
|
|
Post by cambo on Jun 4, 2018 17:47:47 GMT 10
Getting "package not available" when I try to join the server, but have Croft from Steam workshop? There was an issue, should be ok now |
|
|
|
Post by gwyar on Jun 4, 2018 17:58:39 GMT 10
Yep, working now, thanks Cambo
|
|
